Teamac Thinner 15 - 2.5 Litre

Teamac Thinner & Cleaner 15 Overview

Teamac Thinner 15 is a high-quality solvent thinner formulated for use with compatible Teamac and trade coatings where controlled viscosity, smooth application, and a high-quality finish are required. Designed for professional and industrial environments, it delivers consistent performance across a wide range of application methods and working conditions.

Teamac Thinner 15 provides excellent solvency, allowing coatings to be reduced to the correct working viscosity for spray, brush, or roller application. Its carefully balanced evaporation rate promotes smooth flow and even film formation, helping to minimise common application issues such as brush marks, dry spray, and uneven coverage. This ensures a professional finish while preserving the performance properties of the coating.

In addition to thinning, Teamac Thinner 15 is suitable for cleaning spray equipment, tools, and ancillary items, effectively removing residual coating material and helping to maintain application efficiency.

Thinning Use & Application

Teamac Thinner 15 should only be used with coatings that specifically recommend this thinner. Always refer to the relevant technical data sheet before use.

• Spray Application: Typically add 5–20% by volume, depending on coating type, spray equipment, and ambient conditions.

• Brush or Roller Application: Usually 5–10% by volume to improve flow and reduce drag.

Add Teamac Thinner 15 slowly to the coating while mixing continuously until a homogeneous blend is achieved. Always start with the minimum recommended addition and increase gradually. Carry out a test application prior to full use to confirm suitability. Over-thinning may adversely affect film build, coverage, durability, or finish quality.

Safety & Handling

Teamac Thinner 15 is flammable and should be used in well-ventilated areas with appropriate personal protective equipment. Store in a cool, dry place away from heat and sources of ignition.