Teamac Thinner 14 - 2.5 Litre

Teamac Thinner & Cleaner 14 Overview

Teamac Thinner 14 is a high-quality solvent thinner designed for professional coating and finishing applications where controlled viscosity, smooth flow, and consistent results are essential. Formulated for use with compatible industrial, automotive, and trade coatings, it ensures reliable performance without compromising the integrity or appearance of the original product.

This thinner provides excellent solvency, allowing coatings to be reduced to the correct working viscosity for spray, brush, or roller application. Its balanced evaporation rate supports smooth film formation, helping to minimise common defects such as orange peel, dry spray, brush marks, or uneven coverage. Teamac Thinner 14 is also suitable for cleaning spray equipment and tools, effectively removing residual coating material and helping to maintain consistent application performance.

Thinning Use & Application

Teamac Thinner 14 should only be used with coatings confirmed by the manufacturer as compatible.

• Spray Application: Typically 5–20% by volume, depending on coating type, equipment, and ambient conditions.

• Brush or Roller Application: Usually 5–10% by volume to improve flow and reduce drag.

Always begin with the minimum recommended amount and increase gradually while mixing thoroughly. Over-thinning may affect film build, coverage, or durability.

Mix slowly into the coating while stirring continuously until fully homogeneous. Carry out a test application before full use to confirm suitability.

Safety & Handling

Teamac Thinner 14 is flammable and should be used in well-ventilated areas with appropriate personal protective equipment. Store in a cool, dry place away from heat and ignition sources.