RSL FasTop Multi WR Overview

FasTop Multi WR (formerly known as Resuthane JT40) is a water based resin render which can be applied to coves & walls which require significant protection from hard wearing concrete floors.

FasTop Multi WR is designed specifically for use with the FasTop floor screed systems, to maintain the same standards of resistance to abrasion &  chemical contact once it has been fully sealed. Once fully sealed with FasTop Multi T150, it should maintain the exceptional standards of resistance already prevalent.

FasTop Multi WR is ideal for the food & drink sector, pharmaceutical, abattoir, dairy environments & more due to its resistance to all types of chemicals & the anti-slip properties allows floors to be safe in dry & wet conditions. 

Preparation

New Concrete Floors: New concrete must be clean, sound, dry, fully cured and surface laitance removed by vacuum enclosed shot blasting or mechanical grinding, a minimum strength of 25N/mm sq. is required.

Existing Concrete Floors: Remove all dirt, oil, grease, old paint or any other surface contaminants by vacuum enclosed shot blasting, scarifying or mechanical grinding. Fats, oils or grease must be removed by mechanical means and detergent washing making sure all residue of the detergent is washed and removed by rinsing with clean water.

Existing Floors (previously coated): All previous coatings and loose floor paints must be removed by mechanical preparation as described in the above section and primed as specified. If the old resin flooring cannot be removed, then please consult with our technical team for advice on intercoat adhesion & suitability, as it may not be compatible with existing floor coating.

Ideal For:

• Food manufacture & processing
• Brewing & beverage
• Dairies
• Commercial Kitchens
• Pharmaceutical & chemical plant processing
• Abattoirs
• Medical & Healthcare