Renotub Premium Tub & Tile Aerosol Spray Paint

Renotub Premium Tub & Tile Aerosol Spray Paint Overview

Renotub Tub & Tile Aerosol Spray Paint is a one-step acrylic spray paint designed to provide excellent adhesion, durability and colour retention in high moisture areas. This smooth, glossy, waterproof finish is suitable for use on bath tubs, tiles, sinks & all ceramics.

CHARACTERISTICS

• Good adhesion to ceramic and porcelain
• Quick drying, smooth finish
• Strong resistance in humid environments
• Heat Resistance up to 100°
• Can be painted over with other paints & varnishes
• Gloss finish

DIRECTIONS FOR USE

Shake the can very well before use, for about a minute after hearing the noise of the mixing ball. Apply to clean and dry surfaces, removing mould, grease, soap residue & any other kind of dirt. Prepare the surface with an scrubbing sponge & bathroom cleaning solution to create a slightly porous surface for better adhesion. Clean the entire surface once again and rinse with water. Sand the whole surface with P400 or P600 grit wet / dry sandpaper. Clean and dry before painting. Apply the product from a distance of 15-20 cm. Apply in thin layers to avoid paint build up. Three thin coats are always better than one thick layer. Always test product on a small area before painting. The surface can be painted again with the same product after 30-60 minutes. You can apply other products after 24 hours. After 72 hours you can use the bathtub normally.

Once the application is finished, invert the aerosol and purge the valve after use. If the nozzle clogs, replace it with a new one. – Do not apply to equipment connected to the mains and use in well ventilated areas.

CLEAN UP

To prevent nozzle blocking, after use turn can upside down and press button until only gas escapes.