Hi Build Vinyl Direct To Galvanised Paint

Hi Build Vinyl Direct To Galvanised Metal Paint Overview

Hi Build Vinyl is a rapid-dry, high-performance one-coat, anti-corrosive, self-priming topcoat. It forms a tough, flexible film with exceptional adhesion to even the most difficult substrates, including ferrous and non-ferrous metals, weathered galvanised surfaces, and certain plastics.

This versatile coating is designed for both interior and exterior use, providing long-lasting protection and durability. With its one-coat application and self-priming properties, Hi Build Vinyl saves both time and money while delivering reliable results.

Applications & Uses

• Ferrous and non-ferrous metals

• Weathered galvanised steel

• Certain plastics (consult technical team for compatibility)

• Industrial and commercial metalwork

• Interior and exterior structures requiring strong corrosion resistance

Preparation

• Ensure the surface is clean, dry, and free from grease, oil, dirt, or loose rust.

• For non-ferrous or galvanised substrates, light abrasion may enhance adhesion.

• Stir paint thoroughly before use.

Application

• Apply by brush, roller, or spray.

• Thin with Fast Flash Thinner if required.

• Apply in even coats, avoiding over-application.

• One coat is generally sufficient; a second coat may be applied if necessary.

Drying & Curing

• Touch dry: 30 minutes

• Overcoating time: 2 hours

• Full cure: 24–48 hours, depending on temperature and film thickness

Safety Information

• Use only in well-ventilated areas.

• Wear protective gloves, clothing, and eye/face protection.

• Avoid contact with skin and eyes.

• Do not breathe vapours or spray mist.

• Keep away from open flames, sparks, and sources of ignition.

• Store in tightly closed containers in a cool, dry place.

• Dispose of unused paint and containers in accordance with local regulations.