Dumond Smart Strip Pro Paint Remover Overview

Dumond Smart Strip PRO is a professional strength paint remover which effectively removes 2-component, high-performance coatings & lead paints, including multiple coats of oil-based, water-based, acrylics, varnishes, epoxies, urethanes, elastomeric & lead paint from most interior or exterior surfaces - wood, brick, stone, concrete, plaster, metal, most plastic, most glass & fiberglass.

Dumond Smart Strip Pro is water based formulated without methylene chloride, is non-carcinogenic, non- caustic, & non-flammable.

• Delivers superior performance for professionals
• Effectively removes 2-component, high-performance coatings & lead paint
• Ideal for historic restoration, lead abatement, marine & industrial projects
• Removes up to 20 coats in one application
• Water-based, low VOC formulation, non-carcinogenic
• Does not contain methylene chloride or caustic chemicals
• Easy brush, roll, trowel, or airless spray application
• Suitable for interior & exterior applications
• User-friendly & biodegradable
• Does not require neutralization
• Can be used with Dumond Laminated Paper for enhanced efficacy & extended dwell-time

Dumond always recommends working in smaller manageable areas when stripping unless you are working with many people.

Using a trowel, brush, roller or airless paint sprayer, apply paste no less than a 1/8 according to test patch results. For a 24- hour dwell time ¼ inch is recommended.

When applying onto irregular surfaces use a nylon brush to force paste into intricate areas.

Product can dwell between 3-24 hours if necessary.

Dumond Smart Strip PRO provides an average spread rate of approximately 40-50 Sq. Ft. per gallon; results may vary based on substrate texture & porosity.

Removal

Once DumondSmart Strip PRO is ready to be removed use a pressure washer or scraper (preferably plastic).

After all paste has been removed, immediately use a nylon brush and clean water to scrub residue off the substrate, paying attention to crevices, grooves and cracks. Rinse thoroughly with water to remove all remaining residue.

For optimal results, low pressure washing is recommended for final rinse when working outside.

Dispose of paper, paste remover and dissolved coatings according to federal, state and local regulations. If you are having difficulty removing the residue after stripping use the Peel Away After Strip and a nylon scrub brush to remove.